DVIP Network Config Description
DVIP_Net_conf is a specific utility to search the DVIP devices in the same network environment by Ethernet broadcasting, and to configure devices' network settings, such as, Hostname, DHCP mode, IP Address, Subnet Mask, Gateway, Primary DNS and Secondary DNS.
User starts this tool and selects the network interface card that connects to DVIP devices for scanning. All devices will be listed at left side even if any device was set to be fixed IP address in a different network class. For further usage like remote control, it is very easy and helpful to setup devices and controllers in the same environment and then do connection. All details list at right side of each DVIP device can be modified in the same way. Reboot the device after saving configuration will make the settings working.
User can re-select the network interface card once again from the Menu if necessary. Then press Search button on the toolbar to do scanning all over again.
The UI supports different languages, including: Traditional Chinese, Simplified Chinese and English. User can also select it from the Menu.
使用者開啟程式後，可選取有連接DVIP設備的網卡，進入DVIP網路組態工具，假如選錯網卡，進入DVIP網路組態工具，可以在菜單上再重新選取網卡一次，然後也可在菜單上選取使用者習慣使用的語言，包括：繁體中文、簡體中文和英文。使用者可在工具列上，點選搜尋設備的按鈕，在左下欄即可出現掃描到的DVIP設備，當使用者點選DVIP設備的名稱時，即可在右欄出現此設備的詳細資料，包括；名稱、MAC網址、使用DHCP或固定IP模式，當使用者選取固定IP模式時，會出現此台DVIP設備的IP位址、子網路遮罩、閘道器、主要DNS及次要DNS。假如使用者欲更改DVIP的設備名稱、使用者模式、IP位址、子網路遮罩、閘道器等，可在這些欄位上重新輸入後，並按儲存按鈕，此時會出現一個警告視窗，告知使用者重新開機，此時只要重新啟動設備後，儲存的資料即生效。
User starts this tool and selects the network interface card that connects to DVIP devices for scanning. All devices will be listed at left side even if any device was set to be fixed IP address in a different network class. For further usage like remote control, it is very easy and helpful to setup devices and controllers in the same environment and then do connection. All details list at right side of each DVIP device can be modified in the same way. Reboot the device after saving configuration will make the settings working.
User can re-select the network interface card once again from the Menu if necessary. Then press Search button on the toolbar to do scanning all over again.
The UI supports different languages, including: Traditional Chinese, Simplified Chinese and English. User can also select it from the Menu.
使用者開啟程式後，可選取有連接DVIP設備的網卡，進入DVIP網路組態工具，假如選錯網卡，進入DVIP網路組態工具，可以在菜單上再重新選取網卡一次，然後也可在菜單上選取使用者習慣使用的語言，包括：繁體中文、簡體中文和英文。使用者可在工具列上，點選搜尋設備的按鈕，在左下欄即可出現掃描到的DVIP設備，當使用者點選DVIP設備的名稱時，即可在右欄出現此設備的詳細資料，包括；名稱、MAC網址、使用DHCP或固定IP模式，當使用者選取固定IP模式時，會出現此台DVIP設備的IP位址、子網路遮罩、閘道器、主要DNS及次要DNS。假如使用者欲更改DVIP的設備名稱、使用者模式、IP位址、子網路遮罩、閘道器等，可在這些欄位上重新輸入後，並按儲存按鈕，此時會出現一個警告視窗，告知使用者重新開機，此時只要重新啟動設備後，儲存的資料即生效。
Open up
